This Environmental Product Declaration covers N2XH low-voltage power cables manufactured by Electroplast SA Romania. These cables are designed for use in fixed electrical installations in residential, commercial, and industrial buildings — including fire-sensitive environments where low smoke emission and halogen-free properties are required for enhanced fire safety. The representative product for the analysis is the N2XH 3 × 2.5 cable, which represents the largest share of sales volume. Impacts for other products in the same family are presented in Annex 1. TTechnical Characteristics Technical Characteristic Value Standards Voltage rating (U₀/U) 0.6 / 1 kV HD 604 S1, IEC 60502-1 Testing voltage 4 kV HD 604 S1, IEC 60502-1 Minimum laying temp. -5 °C HD 604 S1, IEC 60502-1 Maximum working temp. 90 °C HD 604 S1, IEC 60502-1 Maximum short-circuit temp. 250 °C HD 604 S1, IEC 60502-1 Minimum bending radius Single-core: 15 × D HD 604 S1, IEC 60502-1 Multicore: 12 × D CPR fire performance class B2ca-s1,d0,a1 EN 50399 Low smoke emission Yes EN 61034 Halogen-free Yes EN 60754 Fire retardant Yes EN 60332-3 Construction and Materials N2XH cables are manufactured in a controlled factory environment using: - Copper conductors with high conductivity; - Cross-linked polyethylene (XLPE) insulation; - Halogen-free flame-retardant (HFFR/LSZH) outer sheath. Manufacturing steps include conductor stranding, insulation and sheath extrusion, cooling, printing, and final electrical and mechanical testing under strict quality control. These cables provide: - Enhanced fire safety through low smoke emission and halogen-free properties; - Reliable electrical performance under rated and short-circuit conditions; - Mechanical flexibility consistent with installation requirements. Finished cables are delivered on wooden or recyclable drums, ready for on-site installation.